PCI Tilefast 6 Flex - flexible tile adhesive

PCI Tilefast 6 Flex is a flexible, polymer-modified, high-performance tile cement is perfect for applications, which may experience some shrinkage, vibration, flexing or heavy loads and traffic. As a cost-effective alternative to expensive latex, it provides excellent adhesion to a variety of substrates and is also suitable for use in continuously-immersed situations. Can be used on underfloor heating floors.

For balconies, terraces, under-floor and under-tile heating systems

Classification

PCI Tilelfast 6 Flex adhesive Exceeds BS EN 12004 Class C2TE

Features

• Just mix with water
• In-built flexibility to rival expensive Latex
• For fully-vitrified and tile-on-tile work
• Flexible bed minimises tile cracking
• Ideal Adhesive for use within bathroom Pods
• Water-resistant and resistant to temperatures from -30°C to +80°C, multi-purpose use indoors and out, on walls and floors.
• Non sag, no need for battens and spacers, therefore easy and quick application.
• Deformable, compensates changes in temperature and elongations of the substrate.
• Available in white or grey

Use for

• For indoor and outdoor use.
• For walls and floors.
• For laying ceramic tiles and slabs, porcelain mosaics, brick tiles, clinker bricks and fully vitrified tiles.
• On cement screeds, ground anhydrite and/or gypsum based floated screeds, precast concrete elements, aerated concrete, heated screeds, plaster boards, gypsum fibre boards, dry screeds, mastic asphalt (only indoors), insulation boards, plaster slabs, plaster and on existing wall and floor tiles.

Online Brochure

Click here to view the official online brochure Stonefix Grey Rapid Flexible Stone and Tile Adhesive

Aqua Mix Seal and Finish Low Sheen - stain resistant tile sealer

AQUA MIX SEAL & FINISH LOW SHEEN is a specially formulated water-based blend of acrylic polymers that provides both a stain resistant surface seal and a durable low-sheen finish eliminating conventional two-step methods. May also be used as a pre-grouting sealer. Allows moisture vapor transmission and is not affected by ultra-violet light.

Approximate Coverage:8 to 25 m2 per litre, per coat

Use on

unsealed porous surfaces such as:

• slate
• textured quarry
• saltillo
• sandstone
• terra cotta
• cement pavers
• masonry

Effective for interior and exterior applications.

EXPECTED WEAR:

• Will vary depending on hardness and texture of surface, type of area, surface wear, frequency, and type of maintenance products used.
• The expected wear is up to 3 years. Expect more frequent application on exterior areas.
• Weather conditions, harsh cleaning methods, and high-alkaline, acidic, or solvent-based cleaners will affect wear.

TEST A SMALL AREA:

According to application instructions with a 24-hour cure time to determine desired results. Test for stain repellency using likely contaminants.

APPLICATION:

1) Read entire label before using.
2) For new installations sealer can be applied as soon as 48 hours after grouting.
3) Surface must be clean, dry, and free of existing sealers and coatings.
4) Apply using a sponge or paint pad applicator. Avoid puddling.
5) If 2 or more coats are applied, allow a minimum of 30 minutes drying time between coats.
6) 2 hours after final coat conduct a test to determine if surface is completely sealed by applying water droplets to the surface. If water is absorbed, apply an additional coat. Wait 2 hours and repeat the
test.
7) Ready for surface traffic 6 hours after final coat. Keep area dry for at least 6 hours. Achieves a full cure in 24 hours.
For a high sheen finish on interior surfaces only, apply Aqua Mix Floor Shine & Hardener over Seal & Finish Low Sheen. Allow a minimum of 2 hours drying time before applying Aqua Mix finishes.
9) Clean applicator tools with water after each use.
10) May be reapplied as needed to surface that is clean and dry.

Online Brochure

Click here to view the official online brochure -> Aqua Mix Seal and Finish Low Sheen online brochure

Where to Buy

Click here to buy from an online supplier -> Aqua Mix Seal and Finish Low Sheen

Also of interest

1. Aqua Mix High-Gloss sealer - stain resistant sealer
2. Aqua Mix Enrich and Seal - Natural Stone Sealer
3. Aqua Mix Penetrating Sealer - to resist stains

Aqua Mix Grout Sealer - resists water, oil, and acid-based contaminants

AQUA MIX GROUT SEALER is a water-based sealer that resists water, oil, and acid-based contaminants. Simplifies maintenance and does not change the appearance of the grout. Allows moisture vapor transmission.

Approximate Coverage:9.25 to 29 m2 per litre, per coat

Use On:

• cementitious sanded and unsanded porous grout joints for ceramic tile insallations

Effective for interior and exterior applications.

EXPECTED WEAR:

Will vary depending on hardness and texture of surface, type of area, surface wear, frequency, and type of maintenance products used.

The expected wear is up to 5 years.
Weather conditions, harsh cleaning methods, and high-alkaline, acidic, or solvent-based cleaners will affect wear.

TEST A SMALL AREA:

According to application instructions with a 24-hour cure time to determine desired results. Test for stain repellency using likely contaminants.

APPLICATION:

1) Read entire label before using.
2) For new installations, sealer can be applied as soon as 48 hours after grouting.
3) Grout joints must be clean, dry, and free of existing sealers or coatings.
4) Apply using a soft-bristle paintbrush or sponge paint applicator.
NOTE: Be sure any sealer that does not penetrate surface is removed from surface within 5 minutes of each application using absorbent paper or cotton towels.
5) If 2 or more coats are applied, allow a minimum of 30 minutes drying time between coats.
6) After 2 hours conduct a test to determine if surface is completely sealed by applying water droplets to the surface. If water is absorbed, apply an additional coat. Wait 2 hours and repeat the test.
7) Ready for surface traffic in 2 hours after final coat. Keep area dry for 12 hours. Achieves a full cure in 24 hours.
Clean applicator tools with water after each use.
9) May be reapplied as needed to grout joints that are clean.

Online Brochure

Click here to view the official online brochure ->Aqua Mix Grout Sealer online brochure

Where to Buy

Click here to buy from an online supplier -> Aqua Mix Grout Sealer

Also of interest

1. Aqua Mix Penetrating Sealer - to resist stains
2. Sameday Grout Sealer - Aqua Mix
3. Aqua Mix Seal and Finish Low Sheen - stain resistant tile sealer

Aqua Mix Penetrating Sealer - designed to resist stains

AQUA MIX PENETRATING SEALER is an economical, no-sheen, natural-look, water-based, penetrating sealer designed to resist stains. May also be used as a pre-grouting sealer. Allows moisture vapor transmission. It is also a good grout sealer.

Approximate Coverage:8 to 25 m2 per litre, per coat.

Use On:

• all natural stone (such as granite, limestone, marble, slate, and travertine.)
• porcelain
• quarry
• saltillo
• terra cotta
• cement pavers
• masonry surfaces
• other porous tile and grout where a natural look is desired

Effective for interior and exterior applications.

EXPECTED WEAR:

• Will vary depending on hardness and texture of surface, type of area, surface wear, frequency, and type of maintenance products used.
• The expected wear is up to 5 years.
• Weather conditions, harsh cleaning methods, and high-alkaline, acidic, or solvent-based cleaners will affect wear.

TEST A SMALL AREA:

According to application instructions with a 24-hour cure time to determine desired results. Test for stain repellency using likely contaminants.

APPLICATION:

1) Read entire label before using.
2) For new installations, sealer can be applied as soon as 48 hours after grouting.
3) Surface must be clean, dry, and free of existing sealers or coatings.

4) Apply using a sponge, brush, paint pad, cotton towel, or sprayer.
NOTE: Be sure any sealer that does not penetrate surface is polished dry off surface within 5 minutes of each application using absorbent paper or cotton towels.
5) If 2 or more coats are applied, allow a minimum of 30 minutes drying time between coats.
6) 2 hours after final coat conduct a test to determine if surface is completely sealed by applying water droplets to the surface. If water is absorbed, apply an additional coat. Wait 2 hours and repeat the
test.
7) Ready for surface traffic in 2 hours after final coat. Keep area dry for at least 12 hours. Achieves a full cure in 24 hours.
Clean applicator tools with water after each use.

Online Brochure

Click here to view the official online brochure -> Aqua Mix Penetrating Sealer online brochure

Where to Buy

Click here to buy from an online supplier -> Aqua Mix Penetrating Sealer

Also of interest

1. Aqua Mix Enrich and Seal - Natural Stone Sealer
2. Aqua Mix Grout Sealer - resists water, oil, and acid-based contaminants
3. Premium Natural Stone Sealer - Ultra Solv from Aqua Mix

Aqua Mix High-Gloss sealer - stain resistant sealer

AQUA MIX HIGH GLOSS SEALER is a specially formulated water-based blend of acrylic polymers that provides both a stain resistant surface seal and a durable high-sheen finish eliminating the need for two products. May also be used as a pre-grouting sealer. Is not affected by ultra-violet light.

Use on

• textured natural stone (such as tumbled marble, flamed granite, slate, sandstone, and quartzite)
• textured ceramic (rough to the touch), textured porcelain (rough to the touch)
• quarry
• saltillo
• terra cotta
• cement pavers
• masonry surfaces and other textured stone
• and tile where a high shine is desired

Effective for interior applications only.

Online Brochure

Click here to view the official online brochure -> Aqua Mix High-Gloss Sealer online brochure

Where to Buy

Click here to buy from an online supplier -> Aqua Mix High-Gloss Sealer

Also of interest

1. Aqua Mix Seal and Finish Low Sheen - stain resistant tile sealer
2. Tile Sealer - Aqua Mix Sealers Choice 15 Gold
3. Aqua Mix Sealer and Coating Remover

Aqua Mix Sealer & Coating Remover

AQUA MIX SEALER & COATING REMOVER is a non-flammable, multi-purpose stripper formulated to stay wet longer which gives the product time to remove most sealers, epoxy grout haze, urethane coatings, synthetic finishes, adhesives, and paints. Also dissolves deep-set stains and removes heavy grease buildup.

Approximate Coverage:2 to 5 m2 per litre

Use on

• natural stone (such as granite, limestone, marble, slate, and travertine)
• ceramic
• porcelain
• grout
• quarry
• saltillo
• terra cotta
• cement pavers
• masonry surfaces

Where to Buy

Click here to buy from an online supplier -> Aqua Mix Sealer and Coating remover

Online Brochure

Click here to view the official online brochure - > Aqua Mix Sealer and Coating remover online brochure

Also of interest

1. Tile Sealer - Aqua Mix Sealers Choice 15 Gold
2. Aqua Mix High-Gloss sealer - stain resistant sealer
3. Aqua Mix Penetrating Sealer - to resist stains

Aqua Mix Phosphoric Acid Cleaner - remove grout smears, mineral deposits, rust stains and efflorescence

AQUA MIX PHOSPHORIC ACID CLEANER is a premixed acidic treatment designed to remove grout haze, mineral deposits, rust stains, mortar smears, and efflorescence. Effective for the removal of most hard water stains, lime deposits, and soap scum. Also removes cement grout and mortar residue from tile, concrete, and masonry. Etches concrete. No VOCs, No phosphates.

Use On

• Use on acid resistant natural stone (such as granite and slate),
• ceramic
• porcelain
• quarry
• Saltillo
• terra cotta
• and other acid resistant tile and stone

Online Brochure

Click here to view the official online brochure -> Aqua Mix Phosphoric Acid Cleaner online brochure

Where to Buy

Click here to buy from an online supplier -> Aqua MIx Phosphoric Acid Cleaner

Also of interest

1. Aqua Mix Ex-Treme - acidic cleaner to remove discoloration
2. Aqua Mix Grout Deep Clean - grout cleaner
3. Shower Tile Cleaner from Aqua Mix

Aqua Mix NanoScrub - for cleaning rough or textured surfaces

AQUA MIX NANOSCRUB™ is an abrasive cream cleaner designed to work where other cleaners won’t. It utilizes NanoSTG™ (nano-sized particles) to penetrate below tough stains, dissolve and lift them out. Especially effective for cleaning rough or textured surfaces.

Also removes factory applied waxes and floor finishes, coating sealers, light grout residue (including epoxy), rubber and pencil marks, light mineral deposits, ground-in dirt and most sealer residues. NanoScrub™ is nontoxic, non-flammable and non-acidic.

Use on

• Porcelain
• ceramic
• polished and unpolished natural stone (such as granite, limestone, marble, slate, and travertine)
• grout quarry
• saltillo
• terra cotta
• cement pavers
• masonry surfaces

COVERAGE:

Approximately 200 to 2,000 sq. ft. (19 m2 to 200 m2) per gallon
(3.785 L).

TEST A SMALL AREA:

According to application instructions to determine desired results.

APPLICATION:

1) Read entire label before using.
2) Sweep, vacuum, or dust surface to remove any loose debris.
3) Pre-wet surface with water.
4) Apply NanoScrub™ directly to the pre-wet surface.
5) Agitate with a white nylon pad, scrub brush or scrub machine.
6) Mop or wet vac up residue.
7) Rinse thoroughly with clean water. NanoScrub™ can be used as a power booster, with Aqua Mix Heavy-Duty Tile & Grout Cleaner, Stone Deep Clean, or 1&2 Deep Clean mixed according to directions. Apply chosen product to surface, add NanoScrub™ and agitate mixture. Continue to follow directions on the chosen product making sure a clean water rinse is the final step to remove any remaining residue.

Online Brochure

Click here to view the official online brochure - > Aqua Mix NanoScrub online brochure

Where to Buy

Click here to buy from an online dealer -> Aqua Mix NanoScrub

Also of interest

1. Aqua Mix Grout Deep Clean - grout cleaner
2. Grout Haze clean up - Aqua Mix
3. Heavy Duty Tile and Grout Cleaner - Aqua Mix

Aqua Mix Ex-Treme - acidic cleaner designed to remove years of accumulated discoloration from air pollution or carbon build-up

Aqua Mix Ex-Treme is a non-flammable, heavy-viscosity acidic cleaner designed to remove years of accumulated discoloration from air pollution or carbon build-up. Also removes stains from smoke, soot, red soil and rust. It is a safer alternative to traditional harsh acids.

Where to Use

• Unpolished natural stone
• concrete pavers
• masonry surfaces
• ceramic
• porcelain
• grout
• quarry
• saltillo
• terra cotta
• other acid resistant tile and stone

Where to Buy

Click here to buy from an online supplier -> Aqua Mix Ex-Treme

Also of interest

1. Aqua Mix Phosphoric Acid Cleaner - remove grout smears, rust, efflorescence
2. Heavy Duty Tile and Grout Cleaner - Aqua Mix
3. Aqua Mix Concentrated Stone and Tile Cleaner - for ceramic tiles

Grout Seal - sealer for floor grout

Grout Seal, from Genesis Floorcare, is a formulated sealer for floor grout. In cases where glazed tiles have been applied to the floor, invariably the grout has not been waterproofed. Being porous, dirt is likely to form, even with regular cleaning. Grout Seal will seal the pores, preventing water seepage and collation of dirt thus resulting in a cleaner more hygienic finish. May also be used on wall grout.

Useage

Kitchens, passages, entrance hallways, patios and verandas, etc, or any area where the grout becomes darker when wet.

Directions

Always test in an inconspicuous area first.

Directions

Ensure the grout is clean and free of any wax, oils and dirt.  (Clean with the correct Genesis floor cleaner if necessary)

Shake the contents well.

Punch a small hole in the top of the applicator nozzle.

Tip and run the nozzle along the grout so that the sealer soaks into the grout.  Try not to spill on to the tile.  Any spillage must be wiped off the tile with a damp cloth immediately.

Allow 30 mins or longer for the product to be absorbed. Apply a second thin coat if necessary. Wipe off any excess with a damp cloth.

Where to Buy

Click here to buy from an online supplier -> Grout Seal 1L (covers up to 700m)

Also of interest

1. Grout Joint Cleaner - from Genesis Floorcare
2. Shower Tile Sealer - easy spray application to seal grout joint of a tiled shower
3. Natural Stone Sealer - from Genesis Floorcare