Sameday Tile Grout Sealer - from Aqua Mix
Aqua Mix Sameday Grout Sealer is a no-sheen, natural look, water-based, non-flammable, aerosol sealer especially formulated for grout. This innovative spray is a quick and easy way to apply a grout sealer without the need to wait until the grout has cured.
Can be appled as soon as 2 hours after grouting - making sealing an efficient, economical process. Equally effective on new and exisiting grout. Allows moisture vapor transmission.
Use on:
- Cementitious sanded and unsanded porous grout joint for ceramic tile installations.
TEST A SMALL AREA:
According to application instructions with a 24-hour cure time to determine desired results. Test for stain repellency using likely contaminants.
APPLICATION:
1.) Read entire label before using.
2.) SHAKE WELL before using.
3.) For new installations, sealer can be applied as soon as 2 hours after grouting.
4.) Grout joints must be clean, dry, and free of existing sealers or coatings.
6.) Depress nozzle and spray along grout lines. Some sealer will get on the tile, which will evaporate without the need to wipe dry. NOTE: Be sure any sealer that does not penetrate surface is removed from surface within 5 mminutes of application using absorbent paper or cotton towels.
7.) If 2 or more coats are applied, allow a minimum of 30 minutes drying time between coats. Be careful not to directly rub fresh grout if sealer is applied same day as grout.
8.) After 2 hours conduct a test to determine if surface is completely sealed by applying water droplets to the surface. If water is absorbed, apply an additional coat. Wait 2 hours and repeat the test.
9.) Ready for surface traffic 2 hours after final coat. Keep area dry for 12 hours. Achieves full cure in 24 hours.
10) May be reapplied as needed to grout joints that are clean.
Where to Buy
Click here to buy from an online dealer -> Aqua Mix Sameday Grout Sealer
Online Brochure
Click here to view the official online brochure -> Aqua Mix Sameday Grout Sealer online brochure
