BAL WP1 tanking Provides a watertight barrier for most walls and floors prior to application of ceramic tiles in interior locations such as showers, bathrooms, toilets. WP1 tanking system can be used with underfloor heatin, however, it may not be used in swimming pools, areas of total immersion or as a barrier to prevent water ingress from the background.
continue reading about the BAL WP1 Tanking waterproofing - matting - tape…
BAL WP1 tanking provides a watertight barrier for most walls and floors prior to application of ceramic tiles in interior locations such as showers, bathrooms, toilets. WP1 tanking system can be used with underfloor heating, however, it may not be used in swimming pools, areas of total immersion or as a barrier to prevent water ingress from the background.
continue reading about the BAL WP1 Tanking coating - waterproofing for showers, bathrooms…
BAL Microrevive with built-in Microban® antibacterial protection renews the appearance of existing wall grouts whilst providing an added level of hygiene protection in kitchens, bathrooms and food consumption areas. Suitable for interior use only. It is waterresistant but not suitable for use in power showers or where
prolonged or permanently damp/wet conditions exist.
continue reading about the BAL MicroRevive - antibacterial grout renovator…
BAL ACOUSTI-BONDis a specially formulated ceramic tile adhesive designed to improve the sound reduction properties of a tiled floor. This product should be used in conjunction with approved matting systems to achieve the performance requirements of Part E of the Building Regulations 2000 – Resistance to the Passage of Sound. The product is highly flexible,
continue reading about the BAL Acousti-Bond tile adhesive for floors - sound reduction…
A white, non-slip, ready mixed ceramic tile adhesive designed for use in internal dry and intermittently wet areas. It can be used in domestic showers. Use on a variety of backgrounds including, plasterboard, plaster, cement:sand rendering, existing ceramic tiles, paint and tile backboards.
BAL Green Star is a non-slip, ready mixed wall tile adhesive for use in internal dry and intermittently wet areas. It can be used in domestic showers. Use on a variety of backgrounds including plasterboard, plaster, cement: sand rendering, existing ceramic tiles, paint and tile backboards.
continue reading about the BAL Green Star tile adhesive - for walls…
BAL Quickset Render is a pre-blended rapid setting, single component polymer modified cement: sand mortar suitable for use as a render prior to the application of a variety of ceramic or natural stone tiling.
continue reading about the BAL Quickset Render - preparation for walls…
BAL Quickset Cemetn is specially formulated grey cement, requiring the addition of sand then mixing with water. For the preparation of fast-setting, low shrinkage mortars to be used as screeds or renders.
continue reading about the BAL Quickset Cement - for screeds and render mortars…
BAL GREEN SCREED ADHESIVE is a highly flexible, water and frost-resistant tile adhesive suitable for fixing all types of ceramic floor tiles, including porcelain, ceramic mosaics, terrazzo, natural
stone (excluding marble) in interior and exterior locations.
continue reading about the BAL Green Screed - tile adhesive for floors…
BAL Superflex is a cement-based grout designed with built-in admixture to give increased flexibility and high bond strength. Ideal for grouting porcelain, marble, natural stone, glass and ceramic mosaics, glazed and fully vitrified.
