Ardex D30 ready mixed wall tile adhesive for showers, kitchens, and bathrooms

Ardex D30 is a ready mixed water resistant wall tile adhesive ideal for commercial and domestic power showers, kitchens and bathrooms.

Suitable for virtually all substrates and tile types, including porcelain, ARDEX D 30 does not need a primer and is easy to use with excellent application properties.

ARDEX D 30 can be applied to most backgrounds including gypsum plaster, paper-faced boards, concrete, cement and sand render, rigidly braced and stable sheets and boards e.g. plywood and chipboard, and will also adhere to existing ceramic tiling.

In wet locations the background to be tiled onto should be suitable for use in showers, i.e. cement and sand render, Marmox or Wedi tilebacking boards. If a waterproof protection coat is required to prevent ingress of moisture into the background the surface should initially be treated with ARDEX S 1-K Ready Mixed Waterproof Coating for domestic locations or ARDEX WPC Rapid Setting Waterproof Coating
for both commercial and domestic areas.

Classification

The BS EN 12004 D2 TE designation for ARDEX D 30 classifies the adhesive as an “improved dispersion adhesive with additional characteristics, reduced slip and extended open time”.

Features

• Ideal for use in commercial and domestic showers, kitchens and bathrooms
• No primer required – save time and money
• Up to 20 minutes open timev
• Up to 20 minutes tile adjustability
• Excellent adhesion, conforms to BS EN 12004:2001 as type D2 TE adhesive
• Non-slip and easy to use
• Suitable for all tile types including porcelain

Coverage

Approximately 1 litre per m2 using a 3mm x 3mm toothed and notched trowel.

Where to Buy

Click here to buy online -> Ardex D30 ready mixed wall tile adhesive

Online Brochure

Click here to view the official online brochure -> Ardex D30 online brochure