Mapei MapeGrip D1 tile adhesive - ready to use

MapeGrip D1 is a hi-grab ready-to-use paste adhesive for ceramic tiles.

Where to Use

Bonding of all types of ceramic and mosaic tiles on interior walls.

Example Applications

Installation of ceramic and mosaic tiles over:

• Gypsum plaster and gypsum block walls.
• Gypsum backerboard.
• ement-based renders and cured reinforced
  concrete walls.
• Tile backer boards.

Technical Characteristics

Mapegrip D1 is an adhesive in water dispersion based on synthetic resins, selectively graded minerals and various additives.

Mapegrip D1 is a ready-to-use creamy paste that is easily trowelled with good high initial grab and thixotropic properties for installing wall tiles without slippage.

When set, Mapegrip D1 has high bond strength and is sufficiently deformable for moderate vibration and deformation of building materials.

Grouting

At normal temperatures the joints can be grouted 12 hours after setting the tiles. Large format or non absorbent tiles will take longer.

The joints can be grouted with Keracolor Fine Grain or Large Grain, depending on the joint width, or with Ultracolor (see “The Coloured Grouts” colour chart).

If good resistance to chemical agents is required, use Kerapoxy, a two-component anti-resisting epoxy grout.

For sealing flexible expansion joints, use Mapesil AC single-component silicone sealant. In all of the above cases the width of the joints must be planned according to the type of grout and deformability
of the substrate.

Consumption

Bonding of ceramic tiles:

Mosaic tiles: 1.5 kg/m2 (n. 4 trowel)

Tiles 15×15 over normal renders: 2.5 kg/m2 (n. 5 trowel)

Click here to buy from a reputable dealer -> Mapei MapeGrip D1 tile adhesive

Mapei MapeGrip D1 Brochure

For an official brochure please click here -> Mapei MapeGrip D1 Brochure