StoneFix White Flexible Standard Set (Non-Rapid) Natural Stone and Tile Adhesive
Non rapid setting version of Stonefix highest grade flexible tile adhesive. Same exacting specification but 3 hours working time, whilst still only 12 hours before grouting. Use indoors / outdoors, waterproof, flexible, white, frost resistant, walls and floors, non slip.
Classification
Adhesive audited in accordance with DIN EN 1 2004 complies with the Euro Norm C2TE / C2FT
Features
- or indoor and outdoor use
- For walls and floors
- Flexible
- Anti-Stain and Watermark Proof
- No Add Mix Required, Just Water
- Non Slip – Euro compliance code C2FT
- Ready For Grouting After Approx 12 Hours
- Working time Approx 3 hours
Use For
- For laying natural stone products (travertine, limestone, slate, marble and granite)
- Ceramic tiles and slabs
- Porcelain
- Mosaics
- Brick tiles
- Clinker bricks
- Fully vitrified tiles
Substrates
- Cement screeds
- Ground anhydrite and/or gypsum based floated screeds
- Pre-cast concrete elements
- Aerated concrete
- Heated screeds
- Plaster boards and gypsum fibre boards
- Dry screeds and over-boarded wooden floors
- Mastic asphalt (only indoors)
- Insulation boards
- Plaster slabs and plaster
- Existing wall and floor tiles
Coverage
Coverage: 3.0 – 4.0 sq / m per bag
Where to Buy
Click here to buy from an online dealer -> Stonefix White Flexible tile adhesive
About Stonefix
All STONEFIX products are manufactured in the UK to the very highest standards and are tested and packaged to quality control procedures in accordance with BS EN ISO 9001 series.
