
Stonefix White Rapid Flexible tile adhesive for floor, walls, underfloor heating
STONEFIX Natural Stone White Rapid Flexible Adhesive is suitable for floor and wall tiling, natural stone, porcelain and ceramics. It is also guaranteed for use over under-floor heating and application direct onto timber floors with no priming!
Premium grade tile adhesive, manufactured in the UK to Stonefix highest specification. Use indoors / outdoors, waterproof, flexible, white, rapid setting, frost resistant, walls and floors, non slip.
Classification
Natural Stone Adhesive audited in accordance with DIN EN 12004 complies with the Euro Norm C2FT
Features
- For indoor and outdoor use.
- For walls and floors.
- Flexible
- Anti-Stain and Watermark Proof
- No Add Mix Required, Just Water
- Non Slip – Euro compliance code C2FT
- Ready For Grouting After Approx 12 Hours
- Working time Approx 3 hours
Use For
- For laying natural stone products (travertine, limestone, slate, marble and granite)
- Ceramic tiles and slabs
- Porcelain
- Mosaics
- Brick tiles
- Clinker bricks
- Fully vitrified tile
- On cement screeds, ground anhydrite and/or gypsum based floated screeds, pre-cast concrete elements, aerated concrete, heated screeds, plaster boards, gypsum fibre boards, dry screeds and over-boarded wooden floors (see Technical Advice Note)
- mastic asphalt (only indoors), insulation boards, plaster slabs, plaster and on existing wall and floor tiles.
Substrates
- Cement screeds
- Ground anhydrite and/or gypsum based floated screeds
- Pre-cast concrete elements
- Aerated concrete
- Heated screeds
- Plaster boards and gypsum fibre boards
- Dry screeds and over-boarded wooden floors (see Technical Data Sheet)
- Mastic asphalt (only indoors)
- Insulation boards
- Plaster slabs and plaster
- Existing wall and floor tiles
Coverage
3.0 – 4.5 sq / m per bag dependent upon adhesive bed required, whether tiles are calibrated, and substrate quality.
Where to Buy
Click here to buy from an online dealer ->Stonefix White Rapid Flexible
