Aqua Mix NanoScrub - for cleaning rough or textured surfaces

AQUA MIX NANOSCRUB™ is an abrasive cream cleaner designed to work where other cleaners won’t. It utilizes NanoSTG™ (nano-sized particles) to penetrate below tough stains, dissolve and lift them out. Especially effective for cleaning rough or textured surfaces.

Also removes factory applied waxes and floor finishes, coating sealers, light grout residue (including epoxy), rubber and pencil marks, light mineral deposits, ground-in dirt and most sealer residues. NanoScrub™ is nontoxic, non-flammable and non-acidic.

Use on

Porcelain
ceramic
polished and unpolished natural stone (such as granite, limestone, marble, slate, and travertine)
grout quarry
saltillo
terra cotta
cement pavers
masonry surfaces

COVERAGE:

Approximately 200 to 2,000 sq. ft. (19 m2 to 200 m2) per gallon
(3.785 L).

TEST A SMALL AREA:

According to application instructions to determine desired results.

APPLICATION:

1) Read entire label before using.
2) Sweep, vacuum, or dust surface to remove any loose debris.
3) Pre-wet surface with water.
4) Apply NanoScrub™ directly to the pre-wet surface.
5) Agitate with a white nylon pad, scrub brush or scrub machine.
6) Mop or wet vac up residue.
7) Rinse thoroughly with clean water. NanoScrub™ can be used as a power booster, with Aqua Mix Heavy-Duty Tile & Grout Cleaner, Stone Deep Clean, or 1&2 Deep Clean mixed according to directions. Apply chosen product to surface, add NanoScrub™ and agitate mixture. Continue to follow directions on the chosen product making sure a clean water rinse is the final step to remove any remaining residue.

Online Brochure

Click here to view the official online brochure - > Aqua Mix NanoScrub online brochure

Aqua Mix NanoScrub - for cleaning rough or textured surfaces