Grout Joint Cleaner - cleans old and dirty grout - from Genesis Floorcare

Grout Joint Cleaner cleans old and dirty grout. It is a blend of detergents, acids and thickeners that allow the product to cling to walls and targeted areas of floors thereby giving the chemicals time to purge dirt from the grout restoring the grout to its original finish. It is recommended that the grout be sealed with Genesis Grout Seal once it is clean.

To clean wall and floor grout. Can also be used to remove rust stains on ceramic tiles, baths and basins as well as acrylic baths and basins and borehole water stains on glass etc.

DO NOT use on surfaces that will be harmed by acids such as cement, limestone, marble, granite, porcelain, metals, enameled baths and basins, shower doors, taps and drains etc.
Directions

Always test in an inconspicuous area first.

Coverage

Per Litre : 3 mm grout line: Approx 300 linear metres
6 mm grout line: Approx 200 linear metres

How to Use

• Mask off any areas that may be harmed by acids such as enamels, taps, shower doors, etc
• Cut the nozzle to the required thickness.
• Tip and run the nozzle along the grout so that the cleaner covers the width of the grout.
• Allow 15 mins for the product to work. Do not allow to dry out. Only scrub in severe circumstances.
• Wipe off and rinse.

Where to Buy

Click here to buy from a online supplier  -> Grout Joint Cleaner from Genesis Floorcare