Power Clean – cleaner, degreaser and neutralizer – from Genesis Floorcare

Power Clean is an industrial strength cleaner, degreaser and neutralizer, formulated to cost effectively clean surfaces that have been soiled with oils, grease and general grime.  It is free from ammonia and phosphates and is non-abrasive.  May also be used to neutralize surfaces after they have been washed with acids.  Power Clean is bio-degradable.

Useage

Heavy duty industrial cleaning for factories, workshops, garages, kitchens etc.

When diluted Power Clean is safe to use on all types of hard surfaces and most types of soft surfaces, such as carpets.

Use on glazed ceramics, terracotta, natural stone, concrete, counter tops, marble, granite, porcelain, slate, plastics, corrugated iron, galvanized metals, painted surfaces and colour-fast materials.

Directions

Always test for desired results in an inconspicuous area before beginning the task.   Dilute with fresh clean water only.  Dilute according to task as per the following table:

Task	Dilution	Coverage per Litre
Neutralising after cleaning with Residual Grout Remover	1 – 20 depending on acid dilution 1 – 10 depending on acid dilution	60 square metres 30 square metres
General cleaning	1 - 20	60 square metres
Heavy grease and grime	1 - 10	30 square metres
Very heavy grease, grime and soiling	1 - 5	15 square metres

After testing mix to the correct dilution. Apply the solution to the area using a mop, watering can or spray. Allow approx 10 min for the solution to break down the dirt. Do not allow the solution to dry out. Scrub as necessary in order to remove the dirt but not damage the surface. Rinse off with fresh clean water until no bubbles or residues remain. Inspect after allowing the surface to dry. Repeat if necessary.

Where to Buy

Click here to buy from an online supplier -> Power Clean from Genesis Floorcare 1L (covers up to 60m2)

-> Power Clean 5L (covers up to 300m2)