Mapei Keracolor FF tile grout
Mapei Keracolor is a high performance, polymer modified, water-repellent, cement-based grout with DropEffect technology for joints up to 6mm
Classification
Mapei Keracolor FF is an improved (2) cementitious (C) grout (G) classifies a CG2.
Where to Use
Grouting interior and exterior floor and wall tiling (single fired, double fired, klinker, porcelain tiles etc), stone material (natural stones, marble, granite, agglomerates etc) glass and marble mosaics.
Example Applications
- Grouting floor and wall ceramic tiles in interiors.
- Grouting swimming pools, bathrooms, kitchens
- Grouting particularly smooth and glossy floor surfaces
- Grouting ceramic tile industrial flooring where resistance to chemical agents is not require (garages, warehouse, etc).
Technical Characteristics
The following features are obtained when mixed with the right water ratio and used correctly:
- water repellent and droplet-effect
- good compressive and flexural strength, good resistance to freeze/thaw cycles
- smooth final finish with low water absorption
- very good abrasion resistance
- low shrinkage, therefore absence of cracks and fissures
- good resistance to acids with pH > 3
When mixing Keracolor FF with Fugolastic, a special synthetic resin-based polymeric additive, the final characteristics are improved for use even under harsh conditions (grouting facades, swimming pools, bathrooms, floors with heavy traffic)
Set to Light Foot Traffic
Floors are set to light foot traffic after approx 24 hours
Ready for Use
Floors are ready for traffic after approx 7 days. Swimming pools can be filled 7 days after grouting.
Consumption
Varies depending on the width of joints. See brochure below
Where to Buy Online
Click here to find out more or to buy from a reputable dealer -> Mapei Keracolor FF tile grout
Online Brochure
Click here to view the official online brochure -> Mapei Keracolor FF brochure
