Aqua Mix Floor Shine & Hardener
AQUA MIX FLOOR SHINE & HARDENER is a clear durable floor finish that resists surface abuse and leaves a beautiful high-sheen finish. May also be used for pre-grouting protection on unglazed porcelain. Allows moisture vapor transmission.
Use on all SEALED textured, unglazed tile and stone surfaces such as slate, quarry, saltillo, terra cotta, cement pavers, and masonry surfaces. Effective for interior applications only.
EXPECTED WEAR:
- Will vary depending on hardness and texture of surface, type of area, surface wear, frequency, and type of maintenance products used.
- The expected wear is up to 1 year.
- Weather conditions, harsh cleaning methods, and high-alkaline, acidic, or solvent-based cleaners will affect wear.
TEST A SMALL AREA:
According to application instructions with a 24-hour cure time to
determine desired results.
APPLICATION:
1) Read entire label before using.
3) Unglazed surfaces must be sealed prior to using Aqua Mix Floor Shine & Hardener.
4) Surface must be clean, dry, and sealed.
5) Apply by pouring a small amount of product directly onto sealed floor and spreading evenly with a sponge mop or paint pad applicator – avoid overlapping and puddling.
6) 2 to 3 coats are recommended for a high shine.
7) If 2 or more coats are applied, allow a minimum of 1 hour drying time between coats.
Ready for surface traffic 3 hours after final coat. Keep area dry for 12 hours. Achieves a full cure in 24 hours.9) Clean applicator tools with water after each use.
10) May be reapplied as needed to surface that is clean and dry.
Where to Buy
Click here to buy from an online supplier -> Aqua Mix Floor Shine & Hardener
Online Brochure
Click here to view the official online brochure -> Aqua Mix Floor Shine &: Hardener online brochure
