Aqua Mix Grout Sealer - resists water, oil, and acid-based contaminants
AQUA MIX GROUT SEALER is a water-based sealer that resists water, oil, and acid-based contaminants. Simplifies maintenance and does not change the appearance of the grout. Allows moisture vapor transmission.
Approximate Coverage:9.25 to 29 m2 per litre, per coat
Use On:
- cementitious sanded and unsanded porous grout joints for ceramic tile insallations
Effective for interior and exterior applications.
EXPECTED WEAR:
The expected wear is up to 5 years.
Weather conditions, harsh cleaning methods, and high-alkaline, acidic, or solvent-based cleaners will affect wear.
TEST A SMALL AREA:
According to application instructions with a 24-hour cure time to determine desired results. Test for stain repellency using likely contaminants.
APPLICATION:
1) Read entire label before using.
2) For new installations, sealer can be applied as soon as 48 hours after grouting.
3) Grout joints must be clean, dry, and free of existing sealers or coatings.
4) Apply using a soft-bristle paintbrush or sponge paint applicator.
NOTE: Be sure any sealer that does not penetrate surface is removed from surface within 5 minutes of each application using absorbent paper or cotton towels.
5) If 2 or more coats are applied, allow a minimum of 30 minutes drying time between coats.
6) After 2 hours conduct a test to determine if surface is completely sealed by applying water droplets to the surface. If water is absorbed, apply an additional coat. Wait 2 hours and repeat the test.
7) Ready for surface traffic in 2 hours after final coat. Keep area dry for 12 hours. Achieves a full cure in 24 hours.
Clean applicator tools with water after each use.
9) May be reapplied as needed to grout joints that are clean.
Online Brochure
Click here to view the official online brochure ->Aqua Mix Grout Sealer online brochure
Where to Buy
Click here to buy from an online supplier -> Aqua Mix Grout Sealer
