Invisible Sealer - clear silicone sealant for Natural Stone tiles

Invisible Sealer – clear silicone sealant to maintain the natural look of tiles – from Genesis Floorcare

Invisible Sealer is a clear silicone sealer that will maintain the natural look of the tile.  It is suitable for all low porous tile such as granite, marble and porcelain, and even low porous terracotta, repelling water and most oils.  Invisible Sealer is UV stable and suitable for both interior and exterior applications.   The sealer  impregnates the tile and therefore maintains the anti-slip factors of the tile.

Useage

Tile must be 100% dry before application.  Clean and reapply the sealer whenever the repellant feature of the sealer wears out.  Only use Genesis Multi Clean to maintain the floor after treating with Invisible Sealer.

Sealer Type Penetrating
silicone sealer
Appearance No change
in appearance
Colour Change No colour
change
Coverage Depends on
porosity 7 – 12 square meters
Maintenance Genesis Multi
Clean

How to Use

Ensure that the tile is clean and free from grout, cement, oil, wax and other stains (clean with Genesis Floor Care products as necessary). Ensure that the tile is totally dry before applying the sealer (wait 48 hours after cleaning). Using a suitable applicator, apply an even coat of invisible sealer. Wipe off any excess sealer that has not penetrated after 15 minutes. Wait approx 2 hours for the coat to dry. Apply a second and third coat if necessary following the directions as above Allow to cure before trafficking (12 hours).

Maintenance

To prolong the life of the sealer clean with a mild and neutral detergent like Genesis Multi Clean.  Clean spillages immediately.

Tips

Do not use paint rollers.  Use a lint free cloth or a sheepskin applicator to apply Invisible Sealer.  Do not apply while the floor is still damp.
Allow 10 -14 days after laying the tile before sealing.  Do not pre-seal tiles when using Invisible Sealer.  Excess sealer marks may be removed by reapplying a small amount of Invisible Sealer and buffing off with a dry cloth.  Do not allow water on the floor for 48 hours after sealing.

Where to Buy

Click here to buy from an online dealer -> Genesis Floorcare Invisible Sealer – 1L (up to 30m2 coverage)

-> Genesis Floorcare Invisible Sealer – 5L (up to 150m2 coverage)

No Comments

No comments yet.

RSS feed for comments on this post. TrackBack URL

Leave a comment

Design by Roy Tanck